|
|
E-Z-GO Engine Parts
&
ENGINES
| PART# | DESCRIPTION | OEM# | PRICE |
 #342 |
crankshaft assembly for gas 2 cycle 1980-88 | OEM#17443-G1 | $175.00 | ||
 #343 |
crankshaft assembly for gas 2 cycle 1989-93 | OEM#24513-G1 | $175.00 | ||
 #1356 |
Timing belt for gas 4 cycle 1991-up | OEM#26626-GO1 | $17.00
|
||
 #3802 |
top connecting rod needle bearing for gas 2 cycle 1980-93 | OEM#21965-G1 | $5.50 | ||
 #3864 |
crankshaft bearing for gas 4 cycle 1991-up | OEM#26739-GO1/#6207 | $16.00 | ||
 #3865 |
balancer shaft bearing for gas 4 cycle 1991-up | OEM#26738-GO1/#6004 | $12.00 | ||
 #3866 |
crankshaft bearing for gas 2 cycle 1980-93 | OEM#24504-G1 | $10.20 | ||
 #3912 |
balancer shaft oil seal | OEM#26743-GO1 | $2.80 | ||
 #3914 |
clutch side crankshaft oil seal | OEM#26741-GO1 | $4.00 | ||
 #3915 |
camshaft oil seal | OEM#26715-GO1 | $2.80 | ||
 #3974 |
fan side crankshaft oil seal | OEM#26742-GO1 | $2.80
|
||
 #3991 |
crankshaft oil seal for both sides for gas 2 cycle 1980-93 also fits clutch side 1978-79 TAKES TWO FOR ONE JOB | OEM#14524-G1 | $2.00 each | ||
 #4510 |
exhaust studs for cylinders #4554, & #4558 | $3.00 pkg. of 2 | |||
 #4549 |
Engine rebuild kit includes cylinder & piston assembly, crankshaft, bearings, seals and gaskets for gas 2 cycle 1989-93 | $320.00 | |||
 #4554 |
top end overhaul kit includes cylinder, piston, & rings wrist pin, snap rings, and gaskets for 1980-88 2 cycle | OEM#23416-G1 | $197.00 | ||
 #4558 |
top end overhaul kit. Includes cylinder, 2 port piston & rings, wrist pin snap rings and gaskets for gas 2 cycle 1989-93 | OEM#24619-G1 | $250.00 | ||
 #4560 |
Engine rebuild kit includes cylinder and piston assembly, crankshaft, bearings, seals, and gaskets for gas 2 cycle 1980-88 | OEM#17109-G1 | $325.00 | ||
 #4562 |
including oversized standard | OEM#26519-GO1 | $34.00 | ||
 #4563 |
.25mm oversized | OEM#26519-GO2 | $34.00 | ||
 #4564 |
piston and ring assemblies available with 2 port pistons .50mm oversized | OEM#26519-GO3 | $34.00 | ||
 #4570 |
piston & ring set available for 295CC Standard | OEM#26607-GO1 | $54.00 | ||
 #4571 |
.25mm oversize piston & ring | OEM#26660-GO1 | $54.00
|
||
 #4572 |
.50mm oversize piston and ring set for gas 4 cycle 1991-up 295CC only | OEM#26661-GO1 | $54.00 | ||
 #4573 |
piston ring set Standard | OEM#26608-GO1 | $28.00 | ||
 #4574 |
piston ring set .25mm oversize | OEM#26662-GO1 | $28.00 | ||
 #4575 |
piston ring set .50mm oversize for gas 4 cycle 1991-up 295CC only | OEM#26663-GO1 | $28.00 | ||
 #4590 |
1 port piston & ring assembly Standard | OEM#14997-G1 | $44.00 | ||
 #4591 |
.25mm oversize | OEM#14997-G2 | $44.00 | ||
 #4592 |
.50mm oversize for gas 2 cycle 1980-88 | OEM#14997-G3 | $44.00
|
||
 #4595 |
piston ring set Standard | OEM#14995-G1 | $11.00 | ||
 #4596 |
.25mm oversize | OEM#14995-G2 | $11.00 | ||
 #4597 |
.50mm oversized for gas 2 cycle 1980-88 | OEM#14995-G3 | $11.00 | ||
 #4748 |
exhaust gasket for gas 2 cycle 1989-93 | OEM#12394-G1 | $1.50 | ||
 #4752 |
fuel pump insulator gasket for gas 2 cycle 1978-91 | OEM#14429-G1 | $1.00 | ||
 #4762 |
cylinder base gasket | OEM#14533-G1 | $1.00 | ||
 #4763 |
head gasket | OEM#24512-G1 | $6.00 | ||
 #4764 |
gasket set made up of 1-#4762, 1-#4763, and 1-#4748 for gas 2 cycle 1980-88 | OEM#14554-G1 | $8.00 | ||
 #4776 |
reed valve gasket for gas 2 cycle 1970-88 | OEM#14529-G1 | $1.00 | ||
 #4777 |
reed valve gasket | OEM#24509-G1 | $1.00 | ||
 #4778 |
gasket set made up of #4762, 4763, 4777, 4748 for gas 2 cycle 1989-93 | OEM#24624-G1 | $10.00 | ||
 #4779 |
exhaust gasket muffler to manifold for gas 4 cycle 1991-up | OEM#25531-G1 | $4.00 | ||
 #4780 |
exhaust manifold gasket for gas 4 cycle 1991-up | OEM#26724-GO1 | $7.00
|
||
 #4781 |
rocker cover gasket for gas 4 cycle 1991-up | OEM#26719-GO1 | $8.00 | ||
 #4782 |
cylinder head gasket for gas 4 cycle 1991-up 295CC | OEM#26716-GO1 | $8.00 | ||
 #4783 |
crankcase plug for gas 4 cycle 1991-up | OEM#26713-GO1 | $1.00 | ||
 #4784 |
crankcase cover gasket for gas 4 cycle 1991-up | OEM#26717-Go1 | $4.00 | ||
 #4785 |
camshaft cover gasket for gas 4 cycle 1991-up | OEM#26718-GO1 | $1.00 | ||
 #4786 |
top breather gasket for gas 4 cycle 1991-up | OEM#26721-GO1 | $12.00 | ||
 #4787 |
outer breather gasket for gas 4 cycle 1991-up | OEM#26722-GO1 | $1.50 | ||
 #4788 |
inner breather gasket for gas 4 cycle 1991-up | OEM#26723-GO1 | $1.50 | ||
 #4789 |
carburetor gasket both sides of insulator for gas 4 cycle 1991-up | OEM#26725-GO1 26726-GO1 |
$1.50
|
||
 #4790 |
carburetor to air cleaner gasket for gas 4 cycle 1991-up | OEM#26727-GO1 | $1.00 | ||
 #5160 |
connecting rod for gas 4 cycle 1991-up 295CC & 350CC | OEM#26606-GO1 | $56.00 | ||
 #5161 |
valve guide for gas 4 cycle 1991-up | OEM#26659-GO1 | $16.00 | ||
 #5182 |
intake valve | OEM#26616-GO1 | $12.00 | ||
 #5183 |
exhaust valve | OEM#26617-GO1 | $20.00 | ||
 #5502 |
295CC crankshaft 1991-2001 4 cycle | $312.00 | |||
#5529 |
4 cycle gas 1991-2001 295CC NEW Engine WITH carburetor & 6 month warranty. Comes with a retro kit, which is a new muffler, new ignitor, and instructions included. $2,600.00---$250.00 core = $2350.00 WITH CORE. If core is not returned when engine is received there will be a $250.00 Charge added to your order.
|
$2,600 with core
only plus S&H
|
|||
 #5531 |
crankshaft 1996-2000 350CC | $415.00 | |||
 #5535
|
1996-2002 4 cycle 350CC
NEW engine
WITH carburetor & 6 month warranty.
Comes with a retro kit, which is a new muffler, new
ignitor, and instructions included. $3,500.00- -$250.00==$3,250.00 WITH CORE If core is not returned when engine is received there will be a $250.00 Charge added to your order. |
$3,250.00 with core only plus S&H | |||
 #5557 |
Old style valve retainer for 295cc & 350cc engines. For EZGO gas 1991-up w/old style valves (All 4 cycle) |
|
$12.00 | ||
 #5566
|
Valve stem seal for gas 1991-up 4 cycle 295 CC & 350CC engines | OEM# 72392-G01 | $7.00 |