|
|
Club Car Electric Motors/Parts
| PART# | DESCRIPTION | OEM# | PRICE |
 PART# D377 |
"The Profit Maker" GE Motor High Speed 48 volt(4.7HP@4200RPM)-speeds up to 15MPH or 36volt (3.5HP@3000RPM) -speeds up to 21 MPH. Works with stock, series controller on 48 volt. Can be used in resistor cars with 10 Spline. | 1014678 | $460.00 |
| PART# D378 |
GE Motor for Electric 1995-up 48 volt(3.75HP@3150RPM)-speeds up 19 MPH. Controller upgrade required. Must have a 350 amp controller. | 1017857-04 | $550.00
|
| PART# D379 |
GE Motor. For electric 1994-up 48 volt series, High Speed, 5.3Hp@ 4000RPM controller upgrade required | $530.00 | |
|
PART# D380 |
"The Bad Boy" GE Motor for electric 1994-up, 36 & 48 volt series, High speed & Torque series 48 volt 5.5hp@5700RPM or 36 volt 4HP@4150RPM controller upgrade required. | $620.00 | |
|
|
GE motor 48-volt (5hp@2806rpm) High torque, regen.
Controller upgrade required. For Club Car electric 2000-up 48-volt IQ. Not available from OEM |
$ 650.00
|
|
|
PART#
D390 |
G.E. motor. High speed, regen 48-volt (3.5hp@3775rpm) 24.5 mph with stock controller set at top speed. Former #6381. For Club Car electric 2000-up 48-volt IQ. Not available from OEM |
$600.00 | |
|
PART#
D391 |
GE. motor. High speed, regen 48-volt (3.5hp@3777rpm_ up to 20 mph with stock controller. Former #D6384. For Club Car electric 1996-99 48-volt Power Drive Plus | OEM# 1018545-01 | $600.00 |
|
|
"The Raptor Motor" 36 volt for electric 94-up. Speeds up to 23 MPH. Requires minimum 400 amp controller, 4 gauge cables required. Heavy duty F&R switch & solenoid. | $620.00
|
|
|
|
"The Beast" GE Motor High Torque 48 Volt (11HP@2300RPM)Speeds up to 18MPH, For 36 volt (8HP@1600RPM) speeds up to 15MPH Requires Minimum 400 amp controller | $700.00 | |
|
|
Rebuilt Factory Motor Fleet Speed, Regen for Club Car electric 2000-up 48 Volt IQ | OEM# 1022401-02 | $400.00 |
 #313 |
insulator kit for electric 1994-up | OEM#1994-up | $26.00
|
 #501 |
motor brush for electric pre 1980 | OEM#7363 | $50.00 pkg of 4 |
 #502 |
motor brush for electric pre 1980 | OEM#8785 | $38.00 pkg of 4 |
 #509 |
motor brush for electric pre 1986 | OEM#7363 | $30.00 pkg of 4 |
 #512 |
brush set for electric 1980-93 36 volt | OEM#1011410 | $65.00 pkg of 2
|
 #514 |
brush holder and springs for electric 1984-93 36 volt | OEM#1011284 | $95.00 |
 #528 |
brush set for electric 1980-84 | OEM#1011424 | $46.00 pkg of 4 |
 #530 |
insulator kit for electric 1984-93 36 volt | OEM#1011407 | $12.00 kit |
 #536 |
round insulator with 5/16" hole for advanced motors | $49.00 pkg of 20 | |
 #537 |
square insulator for advanced motors | $49.00 pkg of 20 | |
 #540 |
brush set with hardware for advanced motors | $42.00 pkg of 2 | |
 #545 |
brush assembly 2 each for electric 1994-up 36 and 48 volt | OEM#1017946 | $50.00 |
 #3269 |
4 hp field coil for new style ge motors | $170.00 | |
 #3295 |
2 hp field coil for electric 1984-93 | OEM#1011288 | $120.00 |
 #3296 |
2-1/2 hp field coil | OEM#1011289 | $125.00 |
 #3297 |
armature 2 hp for electric 1984-93 | $350.00 | |
 #3298 |
2 1/2 hp armature for electric 1984-93 | $368.00 | |
 #3851 |
commutator bearing for electric 1984-up 36 volt & 48 volt | OEM#1011290/#6203ZZ | $6.50 |
 #3933 |
shaft seal for old motor with shaft | OEM#1011295 | $9.00 |
 #4309 |
motor brush spring for electric 1984-up | OEM#1011411 | $17.00 pkg of 10 |
 #4325 |
brush springs for electric 1980-84 | OEM#1011420 | $40.00 pkg of 10 |